MyDealer:Tub Grinder
- Length: 18.6 m (Non Loader, Conveyor Unfolded)
- Weight: 24040 kg (Non Loader, Triple Axle)
- Fuel Type: Diesel
- Power: 540 hp (402.7 kw)
Features
With the new Series III duplex drum, the TG5000 offers proven cutting performance with enhanced durability and serviceability.
General Dimensions and Weights - Non Loader
- Maximum Length (Transport): 39.2 foot / 12 m
- Maximum Length (Conveyor Unfolded): 61.1 foot / 18.6 m
- Maximum Width (Transport): 8.4 foot / 2.6 m
- Maximum Height (Transport): 157 inches / 398.8 cm
- Weight – Tandem Axle: 51000 lbs / 23133.2 kg
- Weight – Triple Axle: 53000 lbs / 24040.4 kg
- Tongue Weight – Tandem Axle: 16500 lbs / 7484.3 kg
- Tongue Weight – Triple Axle: 16000 lbs / 7257.5 kg
- Axle Weight – Tandem Axle: 34500 lbs / 15648.9 kg
- Axle Weight – Triple Axle: 37000 lbs / 16782.9 kg
- Sound Power: Sound Power LwA=116.6 dB(A) At the lower control panel = 96.4 dB(A)
General Dimensions and Weights - Loader
- Maximum Length – Transport: 45.5 foot / 13.9 m
- Maximum Length – Conveyor Unfolded: 67.5 foot / 20.6 m
- Maximum Reach of Loader: 27 foot / 8.2 m
- Maximum Width (Transport): 8.4 foot / 2.6 m
- Maximum Height (Transport): 162 inches / 411.5 cm
- Maximum Height – Cab in Operating Position: 18.8 foot / 5.7 m
- Weight – Engine Option One: 68000 lbs / 30844.3 kg
- Tongue Weight – Engine Option One: 24000 lbs / 10886.2 kg
- Axle Weight: 44000 lbs / 19958.1 kg
- Sound Power: Sound Power LwA=116.6 dB(A) At the lower control panel = 96.4 dB(A) In the loader cab = 76.8 dB(A)
Engine Option One
- Make and Model: CAT C15 T4F (Stage IV) Turbo Charged After Cooled
- Number of Cylinders: 6
- Gross Horsepower (Maximum): 540 hp / 402.7 kW
- Torque (Max): 1823.3 ft-lb / 2472.1 Nm
- Fuel Tank Capacity: 251 gal / 950.1 L
- Max Fuel Consumption: 28 gph / 106 lph
- Fuel Type: Ultra Low Sulfur Diesel
- Air Cleaner: Primary & Secondary Backup Filter with precleaner and electric restriction indicator
- Oil Filter: Spin-on
- Recommended Oil: CAT DEO-ULS OR API CJ-4, OR ACEA E9. CAT LABEL 350-0684 IS RECOMMENDED
- Oil Volume with Filter: 40.2 qt / 38 L
- Cooling Medium: Liquid
- Coolant Capacity (Engine and Radiator): 20 gal / 75.7 L
- Air to Boil Temperature: 125 deg
- Alternator: 24 Volt, 190 Amp
- Fan: 42 inch Dia, Variable Pitch, Reversible
- Clutch Type: PT Tech
- Clutch Engagement: Push Button
Engine Option Two
- Make and Model: CAT C15 Tier 3 Turbo Charged After Cooled
- Number of Cylinders: 6
- Gross Horsepower (Maximum): 540 hp / 402.7 kW
- Torque (Max): 1819 ft-lb / 2466.2 Nm
- Fuel Tank Capacity: 251 gal / 950.1 L
- Max Fuel Consumption: 27 gph / 102.2 lph
- Fuel Type: Diesel
- Air Cleaner: Primary & Secondary Backup Filter with pre-cleaner and electric restriction indicator
- Oil Filter: Spin-on
- Recommended Oil: API CC/CD
- Oil Volume with Filter: 42 qt / 39.7 L
- Cooling Medium: Liquid
- Coolant Capacity (Engine and Radiator): 24 gal / 90.8 L
- Alternator: 24 Volt, 200 Amp
- Fan: 42 inch Dia, Fixed Pitch, Reversible
- Clutch Type: PT Tech
- Clutch Engagement: Push Button
Feed System
- Tub Table Thickness: 0.4 inches / 1 cm
- Tub Table Type: T1 Steel
- Table Tilt Degrees: 91 deg
- Millbox Opening: 30.6 inches x 46.6 inches
- Inside Diameter of Tub: 7.8 foot / 2.4 m
- Inside Flare Diameter – At Base of Tub: 8.3 foot / 2.5 m
- Inside Flare Diameter – At Tub Opening: 12.3 foot / 3.7 m
- Depth of Tub: 5.1 foot / 1.5 m
- Wall Thickness: 0.3 inches / 0.6 cm
- Wall Type: T1 Steel
- Loading Height: 10.7 foot / 3.3 m
- Drive Type: Continuous sprocket
- Drive Chain: 120H roller chain
- Drive Tensioner: Automatic hydraulically tensioned mechanical slide
- Drive Motor: Open loop
- Tub Roller Quantity: 8 carrier, 8 guide
- Tub Speed: 10 rpm
- Tub Agitators: 4
Safety System
- Thrown Object Restraint System: Pivoting tub cover assembly
- Tub Cover Description: Hydraulically activated
- Tub Cover Positions: Transport and Operate with Hydraulic Lock. Transport also has mechanical lock
- Rotor Deflector: Standard
- Falling Object Protection at Control Station: Overhead and side protection
Duplex Drum
- Millbox Opening: 23 inches x 49 inches
- Drum Diameter: 22.5 inches / 57.2 cm
- Tip Diameter: 29 inches / 73.7 cm
- Drum Cutting Width: 44 inches / 111.8 cm
- Drum Skin Thickness: 1.5 inches / 3.8 cm
- Drum Speed: 2050 rpm
- Tip Speed: 15612 rpm
- Bearing Type: Spherical roller
- Bearing – Inner Race Diameter: 4.3 inches / 11 cm
- Bearing – Dynamic Capacity: 136000 lbs / 61688.6 kg
- Number of Hammers: 7
- Number of Cutters: 14
- Cutter Block Types: Block style single bolt wide 3 inches x 3.5 inches wide; 2 bolt 2 inches x 3 inches narrow
- Center Retention Pin Dimensions: 2 inches
- Number of Wipers: 4
Screens
- Screen Dimensions: 47 inches x 29 inches x 3/4 inches
- Screen Type: AR 400, Reversible, Qty 2
- Breaker Bar Type: Replaceable T1 Steel Bar
- Breaker Bar Dimensions: 2.5 inches x 3 inches
- Number of Sides: 4 Usable Edges
- Screen Area: 2700 sq in / 17419.3 sq cm
Driveline - Engine Option One
- Drive Shaft: Custom 1810
- U – Joints: Greased (qty 2)
Discharge System - Single Belt Design
- Width: 36 inches / 91.4 cm
- Belt Design: Standard: 3-ply 330 V-Cleated Heavy Duty: Straight Warp Single Ply 330# both with V-cleat
- Splice: Standard: Armored Stainless Steel Cable Heavy Duty: Super Screw
- Return Roller Quantity: 5 Standard and 1 Vibrating Roller
- Idler Roller Diameter: 8 inches / 20.3 cm
- Standard Drive Roller Diameter: 12.8 inches / 32.4 cm
- Magnetic Drive Roller Diameter: 12.8 inches / 32.4 cm
- Drive Motor: Eaton
- Belt Speed: 778 ft/min / 237.1 m/min
- Load Height: 14 foot / 4.3 m
Hydraulic System
- Tank capacity: 90 gal / 340.7 L
- Recommended Oil: HY POWER 68
- Filtration Method: In Tank Return Filters (qty 2) with suction strainer
- Number of Coolers: 1
Implement Hydraulics
- Components: Conveyor
- System Type: Open Loop
- Pump Type: Gear
- Pump Flow at Maximum RPM: 20.7 gpm / 78.4 L/min
- System relief pressure: 3000 psi / 206.8 bar
Tub Drive Hydraulics
- System Type: Load Sense, Pressure Compensated
- Pump Type: Axial Piston, Variable Displacement
- Pump Flow at Maximum RPM: 22.1 gpm / 83.7 L/min
- System relief pressure: 3045 psi / 209.9 bar
- Motor Series: Eaton VIS45
Clutch Hydraulics
- Tank capacity: 21 gal / 79.5 L
- Recommended Oil: VMF Gold
- Filtration Method: Spin on High Pressure
- Number of Coolers: 1
- System Type: Open Loop
- Pump Type: Gear
- Pump Flow at Maximum RPM: 10.6 gpm / 40.1 L/min
- System relief pressure: 260 psi / 17.9 bar
Loader Hydraulics
- System Type: Load Sense, Pressure Compensated
- Pump Type: Axial Piston, Varible Displacement
- Pump Flow at Maximum RPM: 54.2 gpm / 205.2 L/min
- System relief pressure: 3335 psi / 229.9 bar
Electrical System
- System Voltage: 24 Volt
- Battery: Group 8-D, 1155 CCA (Qty 2)
- System Protection: Fused
Control Station
- Display Type: LCD Multi-Function
- Engine Information: Operational, Diagnostic and System Parameters
- Machine Information: Operational, Diagnostic and System Parameters
- Operational Faults: SAE J1939 Diagnostic Codes
- Gauges: Fuel Level, Tub Pressure, Conveyor Pressure, Auxillary Hydraulic Pressure,
- Switches: Moisture Proof, Toggle Style
Radio Remote Control
- Display Type: LCD Multi-Function
- Engine Information: Yes
- Machine Information: Yes
- Operational Faults: Yes
- Switches: Sealed Membrane
- Operating Range: 300 feet
- Battery Type: (qty 6) AA Alkaline
- Channel Setting: 50 channels
Loader Cab
- Display Type: DP10
- Engine Information: Yes
- Machine Information: Yes
- Operational Faults: Yes
- Gauges: Loader Hydraulic Pressure
- Switches: Moisture Proof, Toggle Style
Chassis
- Frame Description: Continuous I-beam
- Hitch Type: Replaceable king pin 2″
- Fender Description: Bolt On, 3/16″ Formed Steel
- Brake Type: Air Actuated w/ Spring Applied Park Brake
- Trailer Light Type: 12/24 Volt LED
Axle/Suspension - Option One
- Axle Type: Tandom Axle Over-Slung Spring Suspension (Non-Loader)
- Capacity: 20000 lbs / 9071.8 kg
- Tires: 445/50R22.5 Aluminum Hub Piloted Super Singles
- Wheels: 22.5
- Ground Clearance: 11 inches / 27.9 cm
Axle/Suspension - Option Two
- Axle Type: Triple Axle Over-Slung Spring Suspension (Non-loader and loader)
- Capacity: 20000 lbs / 9071.8 kg
- Tires: 445/50R22.5 Steel Hub Piloted Super Singles
- Wheels: 22.5
- Ground Clearance: 11 inches / 27.9 cm
Loader
- Loader Reach: 27 foot / 8.2 m
- Pedestal/Cab Rotation: 370 deg
- Loader Lift Capacity at Full Reach: 3500 lbs / 1587.6 kg
- Loader Lift Capacity at 10 ‘ (3.05 m): 12250 lbs / 5556.5 kg
- Grapple Type: Multiple Tine, Continuous 360 Degree Rotation
- Grapple Rotation: 360 deg
- Grapple Weight: 1315 lbs / 596.5 kg
- Loader Controls: Pilot Operated
- Climate Controls: A/C & Heat
- Radio: AM/FM/WB/AUX/ SIRIUS Satellite Radio ready with two 4″ speakers
- Window Type: 3/8″ Polycarbonate
- Front Intrusion Guard: 5/8″ diameter rods welded wire mesh
Optional Air Compressor
- Air Compressor Brand: Mi-T-M
- Engine: 13 hp Honda
- Maximum Pressure: 175 psi / 12.1 bar
- Maximum Air Flow: 29 cfm / 0.8 cmm
- Tank capacity: 30 gal / 113.6 L
Other Options - Tub Grinder
- Screens: Optional
- Special Tools Group: Optional
- Special Paint: Optional
- Extended Warranty: Optional
